Credible Online Farrier Suppliers of Horse Hoof Service Equipment
Are you managing a retail unit for farrier supplies in the UK and are thinking of ideas to maximize customer satisfaction? If yes, it is advisable to take a look at our offered products, tools and equipment. Along with adequate farriery skills, your supplied equipment must also be of high-quality and offered at the best price to keep registered farriers and their horses happy. Perhaps it’s time to increase your existing inventory of tools with tools which are made of better steel composition and quality. Easy Trim is amongst the leading brands of farrier supplies in the UK and can meet your requirements with consistent and utmost reliability just as they have done as manufacturer for over 22 years. Only with us you can always expect and rely upon our complete range of cutting-edge tools for farriers and for pet groomers.
EASYTRIMLONDON is supplying its tools globally while maintaining the same quality standard. We have highly skilled staff that travel across the country demonstrating optimum utilization of tools for maximum productivity and for longevity. By retailing our brand products you can order a full and complete range of farrier tools including the following in several variants:
• Horse hoof rasp
• Nail puller
• Dematting Rake
• Gouge groover
• Hoof loop knives
• Farrier Driving Hammers
• Grooming scissors
• Clench cutters
• Radius Rasp Coarse & Fine (for Mustang roll)
• Clencher
• Horse Hoof Nipper
• Horseshoe tools
• Shoe-Pullers
• Pet Grooming tools
• Other Farrier Supplies UK
The Significance of Farrier Business
In the current times, horses are among the most valuable livestock. Rather than heavy load transportation, they are contributing a significant role in the sports and entertainment industry. Therefore, adequate grooming is necessary on a regular basis. If you are running the business of Farrier, consider it a wise decision. Below is a list of some reasons why?
1. Continuous service
The horse hooves grow continuously that is why they require reshaping and adjustment on a regular basis. After every 1-2 months, it is crucial to trim them in order to maintain adequate balance in the limbs. A horse owner needs to visit on a regular basis for service. As long as your service quality is top-notch, the business will never slow down. Consider us the most credible farrier suppliers in the UK who can provide you with tools for every minor and major job.
2. Distinctive skill
Becoming farrier is a distinctive skill that people will not be able to find randomly anywhere. With adequate skills and perfectly designed tools, you can easily make a huge regular customer base. We will supply horse hoop rasp, rakes, nail pullers or whatever you need for perfect trimming.
Life of A Farrier And His Favorite Tools
The work of a farrier can be hard and dangerous. It takes years of education to properly understand the best methods to trim or fit a shoe to a particular hoof. Done improperly, the horse may sustain injury. Many of the tools mentioned in this article are useful tools in the hands of a farrier, or used under the guidance of a farrier. To learn how to best use these tools for your horse, always work with your farrier to make sure the health of the horse is not compromised.
Basic Farrier Tools
A device used in the examination of the horse’s hooves to pinpoint sources of pain by applying pressure in certain areas. This tool is used by the farrier looking for an abscess, or by a veterinarian as part of a standard lameness exam.
Care must be taken by the user to reduce the chances of a false positive reading from a sensitive horse.
This is a multi-purpose tool that all farriers use. It is like a nail file for horses and enables the farrier to keep the horse’s hooves even and level if unshod or lightly rasp any hoof that overhangs a shoe. It is used to finish a trim by rasping off any extra hoof and rounding up the edges. It can also be used to rasp down nails and hoof wall where needed.
Recently available are rider’s rasps. These are small rasps that can be used by the horse owner to round-off sharp edges that may occur on the trail.
The farrier uses this specialized knife to cut out excess sole and frog in the feet of the horse. Both left-handed and right-handed versions of this knife are available, allowing the farrier to use the appropriate hand depending on the side of the horse he is working on.
These knives are very sharp and dangerous to both the farrier and horse if not used properly.
These are used to cut the hoof wall down to the correct length and to cut off any excessive or damaged sole or hoof area to reduce the need for extra rasping. Skilled farriers use hoof nippers to remove not only the overgrown hoof, but also to bevel the edge of the hoof to reduce the amount of rasping that is required. Hoof nippers are also used to trim the frog of the hoof.
Because hoof nippers look similar to hoof pullers, the traditional finish of the hoof nipper has straight handle ends while the handle ends of the puller are rounded balls (see below).
This tool looks like a hoof nipper, but is larger. It is used to pull off the horse’s shoe or shoes when necessary. Before using this tool, the farrier will unclench the nails used a clinching block prior to pulling. This reduces the damage that would otherwise occur in pulling a shoe with the clinches still holding fast.
Patience is key to pulling a shoe. Work both sides of the shoe branches to gradually loosen the nails. Used incorrectly, pullers can place undue pressure on the horse’s sensitive sole and cause pain or bruising.
Anvil
All farriers need an anvil to mold horse shoes into the proper shape and style needed. Since each horse’s hoof is different, the farrier needs to custom fit each shoe by shaping it on the anvil. Another use of the anvil is to make sure that the shoes are absolutely flat. It is very difficult to flatten a shoe without the skill of the farrier and the use of an anvil. If the shoe is not absolutely flat, then it will certainly pull off and may cause pain to the horse.
A farrier’s nailing hammer is a small hammer that is used to punch nails through the horse’s hoof to hold the shoe in place. The one side is used to drive the nails and the other side, which has two protruding claws, allows the farrier to “wring off” the nail when it comes out the side of the horse’s hoof.
This hammer is surprisingly small. It is important that the farrier obtain a “feel” for the nail as it is driven to make sure the nail emerges at the correct level.
These clinches are used to fold over the nail to make sure the horse shoe stays on the hoof. Two different kinds of clinchers are used. One has a short, ball-like head and the other an “alligator-like” head. Most farriers develop a personal preference for the one that works best for them. Clinching the nails is one of the final steps of shoeing a horse, followed by mostly cosmetic rasping.
Nailing or Clinching Block
This is usually a small piece of metal with an angled edge. It is put underneath the wrung-off nail when “setting” the nails before clinching. The nailing block is held against the nail clinch while the farrier strikes the nail head to seat it in the shoe. This tool is also used to unclench a nail prior to pulling the shoe.
Hoof Stand
A hoof stand is used for finishing a nailing job and is especially helpful in easing the strain of lifting an injured leg. Hoof stands come in many heights and shapes and each farrier determines which kind works best in their practice. Many farriers to not use a hoof stand, as traditional farrier skills are taught to support the hoof in various ways against the body depending on the operation being performed.
Some farriers use a specialised gouge to measure hoof angles and check the balance of the hoof. This is a relatively new item in the farrier’s tool kit and some farriers prefer to use their eyes and their experience when determining hoof angles and balance. The hoof gouge gives a more precise and objective measurement, and can be used to assure that left and right sides of the horse have similar hoof angles.
